|
Author |
Message |
john
Joined: 13 Mar 2005
Posts: 46
Location: SW Herefordshire, UK
|
Posted:
Tue Aug 09, 2005 3:43 pm
Post subject: Cloudbusters and black lines |
|
|
Timely and
inspiration visit from Kelly and Cesco. Kelly discovered
that a CB placed on a black energy line would convert it
to positive, which a TB, HHG and Earth Pipe wouldn't do,
not to this nasty line anyway. It remains to be seen if
this is lasts. This, incidently
, is the holy grail of geopathic dowsers, who seem to
rely on a copper rod up to now.
This line passed through the corner of the cellar where
two nasty demonic type spirits were in residence, one in
this corner by the window, taken 2-3 days after the CB
was placed on the line:
When the CB was put on the line they changed from being
like hissing alley cats into grim silence, and the last
time Kelly looked they were crying
,
so I hope the line was the reason they were there, or
the anchor for them. Also that, IMO, is another holy
grail of house/geopathic dowsers, being able to remove
nasty spirits
(and I don't see how you can clear a house effectively
without dealing with negative lines) One friend refused
to go in the cellar, so not something to have in your
house.
Here is the 28mm CB on the line looking in the lines
direction
Kelly first discovered this on a black line in the park
that a dowser had previously found, where I had dug a 3
ft deep hole and filled with high quartz pebbles, plus 4
TBs, to no effect.
He also discovered that a 15mm pipe CB also did the
trick, with the pipes being about 2ft long (also, no
good with just the base). Here is a 15mm one in front of
the house, being to the right of the bush, line goes
through double doors:
It was also a great luck to get Kelly and Cesco to make
some coils and tortain CBs, this one is pride of place
by the house, on a crossing point for two bad lines
and this is a 22mm tortian pipe one (due for London)
near my first CB:
So this is CB Country at the moment, 7 around at the
moment
Kelly did some work on a few trees which was an
experience, found a chi waterfall nearby, as well as
some vortexes which he opened, I'll leave him to talk
about that if he wants, or Rich who was responsible for
their visit here. Quite an honour to get Cesco to do the
coil for my Big Secret and Kelly to tune it
john
_________________
WHALE Orgone |
|
|
Rich
Joined: 17 Mar 2005
Posts: 98
Location: South UK
|
Posted: Tue Aug
09, 2005 5:17 pm Post
subject: |
|
|
It was a
wonderfilled few days. Johns, Court, the grounds, and
the area in general is a stunningly beautiful part of
the UK, an area which shows that all the bloomin' rain
we endure has some value to our countryside!
I will leave the Votex stories to Laozu, as he and Cesco
are currently on a major jaunt and dont want to steal
any thunder, however I will say the whole experience was
amazing.
One thing i would like to add was a nice idea which
popped up, as when we made our first two torsions we
only had rather small xtals which would fit into Cesco's
pipe LSC's as finding xtals with a negative end which
will touch the reverse 'S' is quite tricky. We found
that you can put a smaller ctystal with the negative end
touching the 'S', then placing another large xtal ontop
seems to work well;
The picture above also highlights another issue, this
being that the negative end seems to be the
very lowest point
of the xtal, to get around this, again we tested and
found that if you break away a piece of xtal at the
edges which is lower you can create a centred negative
end (or at least closer to centred), so using the
picture above as an example - you can break off the
negative peak where the xtals touch in the picture,
leaving the peak below it as the negative point.
Above is just to show that once you have chipped off the
edges you can place straight (although I haven't done
the chipping in the picture - it is just to show the
idea).
This is clearly still a tricky thing to do, as the xtals/coil
requires setting into a little resin/shavings and must
touch positive (tip) to negative (lowest point), but
with care this should produce a souped up pipe plug,
John and I will be experimenting with this on our next
few CBs which we will hopefully sell (at around cost
price) on Johns 'TowerbustersUK' as long as they are of
a good quality energy wise.
After a demonstration by Cesco I had a go at a LSC,
strewth! they are far from easy, but will practise in
hope of emulating one of his great creations.
Good Times. Much thanks to John and his family for
putting us up.
Peace
Rich |
|
|
Laozu
Joined: 25 Jan 2005
Posts: 83
Location: Palouse Hills
|
Posted: Sun Aug
21, 2005 1:24 pm Post
subject: |
|
|
Cesco and I owe
many thanks to John and Rich for there wonderful
hospitality during our brief sojourn in England, and for
picking us up at the airports and driving us to vortices
about Herefordshire.
John's place is like no other we have seen. It is if it
were taken out an illustration of a fairy tale book, or
as if one were taken back to England of the 10'th
century.
When Rich and I arrived the first day at John's place,
he took us on a short tour of the place, and toward's
evening we got to the field with the negative line. John
asked if the qi in such a line could be changed, and I
don't recall which of us thought of the idea of burying
a CB on it. But next morning before going to Stansted to
pick up Cesco he transferred a CB he already had to the
line, and when we four checked on it that evening, it
had turned positive (at least as far I could see in each
direction).
As reported above, a smaller CB turned out to do the job
as well.
A little over a half week later Cesco and I were in
Germany visiting CB-Ray, a member of the German orgonite
forum. There was a negative line through his living
room, and there was also a CB planted just outside the
house on that line. Given our experience in England,
this seemed quite strange, so we decided to remove the
CB and see what, if any, changes would occur. Rainer
(CB-Ray) began to remove the soil from about the CB and
found four very strong maganets which he had forgotten
that he had placed in the ground about the CB to
increase its power. As soon as he had removed the
magnets, but before he removed the the CB, the line
turned immediately positive.
There was another negative line in his house, but there
was nowhere outside on that line which was suitable for
placing a CB. Cesco suggested that we try placing TBs in
a circle on the line. After some experiment we found
that 6 was the optimal number. However it made a
difference what the diameter of the circle was, as to
how strong power of the TB-configuation was. In this
case, the optimal was about a foot, as I recall. Just
putting the 6 on the circle in the house helped
somewhat, but the line remained a bit negative. So we
went outside and buried them in the ground on the line,
in the circular configuration with the proper diameter.
The result was a quite positive line.
We applied the same treatment on a negative line through
the farmhouse near the Continental CB in Switzerland
about a week later. And with the same positive result.
In Switzerland near the region of Zürich, and in
Heidelberg, Germany we applied a similar solution to
some special places of power. But this is another story. |
|
|
john
Joined: 13 Mar 2005
Posts: 46
Location: SW Herefordshire, UK
|
Posted: Mon Aug
22, 2005 11:21 am Post
subject: |
|
|
Coincidence
control was working overtime, good to get something come
from finding that line with the dowser years ago. And I
just happened to have two CBs handy
Then the right man turned up with the knowledge
Just wanted to say I had 4 TBs on the directions NESW,
on that line, not sure of the diameter, but under a
foot. Can't wait for you to see if the CB works if
buried in clay pipe, and how small we can make it, but
if 6 TBs does the trick that is a great discovery.
I can send 6 Tbs to some dowsers and see what comes of
it, but not going to hold my breath on that one.
john
_________________
WHALE Orgone |
|
|